PRODUCT

Universal PF Corrector

Three Phase Power Factor Corrector — Hybrid Technology. Certified by the Electrical Research & Development Association (ERDA), Baroda.

Overview

The Universal PF Corrector is a three-phase power factor correction device manufactured by Shree Padmavati Agency. It is built around a MOSFET-based semiconductor design and is installed across a wide range of industrial, commercial and municipal applications.

Increasing the power factor at the service reduces the current drawn for the same load, which lowers kWh/unit consumption at the service and can help avoid low-power-factor penalties on the electricity bill.

Key applications

Industrial manufacturing Automobile showrooms & service stations Garment & textile processing PET & plastic industries Dairy industries Pharmaceutical companies Paper mills Ceramic industries Government / municipal bodies

Universal PF Corrector units labelled and installed

UNIVERSAL PF CORRECTOR Hybrid Technology

TECHNICAL SPECIFICATIONS

Rated performance

Specifications as supplied by the manufacturer. Figures are per phase / per device unless otherwise noted.

01Product RatingAverage 25 KVAR / each phase

02Rated Voltage415 V AC ± 5%

03Rated CurrentAverage 10 A to 13 A (depends on peak-to-peak voltage)

04Rated Frequency50 Hz

05Number of Phases3

06Connection TypeDelta / Parallel Tape

07Permissible Overload Current1.2× rated current

08Permissible Overload Voltage1.1× rated voltage

09Ambient Temperature10°C to 50°C

10Total LossAverage 0.5 watts / KVAR

11Tolerance (Without Resistors)± 5%

12Tan Delta0.20% max

13PVC Wire6 sq. mm minimum, each phase

14Discharge Resistors220 KΩ / 1 Watt (internally connected)

15Core ComponentSemiconductor "MOSFET"-based design

16Harmonic SupportHarmonic Level 2 & Filter supported

REMARK: DIFFERENCE HARMONIC LEVELS GENERATE FROM INDUSTRIAL MACHINERIES & INCREASE THE HEATING & ELECTRICAL LOSES WHICH EFFECT TO AVRAGE MD.

INSTALLATION GALLERY

Universal PF Corrector, installed

Capacitor bank and PF corrector control units installed in a panel

Capacitor bank with Universal PF Corrector control units

Wall-mounted Universal PF Corrector units at a factory

Multi-unit wall-mounted installation, three-phase distribution

Universal PF Corrector units numbered and wired to a distribution board

Twelve-unit installation wired to a common distribution board

Universal PF Corrector units mounted near a sink area

Installed and commissioned Universal PF Corrector units

Twelve Universal PF Corrector units labelled and wired

Labelled units connected across a shared distribution box

Universal PF Corrector units mounted in a corner installation

Corner-mounted installation serving multiple circuits

Need this for your facility?

Request a Quote